Tacusil® V20014 Contact Adhesive (Low VOC) has been developed for non-toluene based on polychloroprene adhesive with special resin to promote strong bonding. It is the most suitable for bonding a wide range of materials and easy for application. V20014 is short tack retention time and suitable for EVA, rubber, and many materials that is difficult to bond.
Store in a cool place away from the fire, avoid direct sunlight, rain and sudden temperature difference.
After opening the tank, avoid sunlight, and keep the air circulation at the operation place closed when not in use.
Personal protective equipment:
General protective and hygienic measures:
- Keep away from foodstuffs, beverages and feed.
- Immediately remove all soiled and contaminated clothing. Wash hands before breaks and at the end of work.
- Avoid contact with the eyes and skin.
Tacusil® V20015 primer is designed to match the moisture-hardening series products and is applicable for the first coating of not only rubber but also stainless steel, TPU, PC, ABS and nylon. This product can be applied to rubber or plastic metals by spraying and painting.
Store in a cool place away from the fire, avoid direct sunlight, rain and sudden temperature difference.
After opening the tank, avoid sunlight, and keep the air circulation at the operation place closed when not in use.
Tacusil® V20016 is an accelerating addition-type silica gel, which can create excellent adhesive coating layer on addition-type silica gel, solid silica gel or other materials like aluminum alloy, stainless steel, ntextiles, PU, PI thin film, etc.
Tacusil® W20002 water-based environmental-friendly flux cleanser is a cleanser based on Micro-emulsion Cleaning Technology. It is a water-based environmental-friendly flux cleanser specially developed for post-welding flux cleaning in high and medium pressure online or batch spray cleaning systems.
Tacusil® W20003 is an acrylic water-based ink with medium viscosity. The solid content of the product is high, and it contains no organic volatile components, making it an ideal substitute for traditional solvent-based inks. With only slight thixotropy, Tacusil® W20003 is particularly suitable for silk screen printing process, and has good adhesion to ABS, PC, FR4 and most metals.
Store in a cool place away from the fire, avoid direct sunlight, rain and sudden temperature difference. After opening the tank, avoid sunlight, and keep the air circulation in the operation place. Please close the cover when not in use.
