Use only in the area with proper ventilation, avoid long-term or frequent contact with skin, minimize the risk of allergic reaction, wear glasses, gloves, protective masks, anti-skid shoes and other protective articles during operation, and wash thoroughly after operation.
Tacusil® 210060 is one component hot melt type with moisture curing polyurethane adhesive. This product has physical reactive by hot melt and then goes on chemical reactive by moisture in the air to get the final bonding strength. It also exhibits thermal resistance.
Store in a cool place away from the fire, avoid direct sunlight, rain and sudden temperature difference.
After opening the tank, avoid sunlight, and keep the air circulation at the operation place closed when not in use.
Tacusil® 210066 is a one-component polymeric hot melt with solid content of 100%. The product is solid at room temperature. Heat the adhesive to apply. After applying, the product will react with the surrounding moisture to produce strong adhesion, and no additional heating is required during the reaction.
Tacusil® 210069 is an one-component, moisture-curing polyurethane hot melt. At first, it conducts physical cementing reaction in the hot-melt form, and then conducts chemical secondary reaction with the moisture in the air to achieve the physical property of final adhesion and excellent heat resistance.
Store in a cool place away from the fire, avoid direct sunlight, rain and sudden temperature difference.
After opening the tank, avoid sunlight, and keep the air circulation at the operation place closed when not in use.
Tacusil® 210072 is a two-component polyurethane adhesive with low modulus and high impact. It has the ncharacteristic of rapid positioning and curing. It has good adhesion to materials like glass, plastics, and the adhesion performance is not affected by low temperature.
Tacusil® 210078 is a two components PU casting sealant. It has excellent electrical properties, impact resistance and weather resistance. It is suitable for insulation protection of electronic components, such as mutual inductor and capacitor.
It should also be used as little as possible in well ventilated designated areas. Prevent ignition source and electrostatic accumulation. Containers shall be labeled. Keep container closed when not in use. Wear appropriate protective equipment to prevent inhalation and contact with skin and eyes. When using such products, ensure that a high standard of personal hygiene is maintained.
It should also be used as little as possible in well ventilated designated areas. Prevent ignition source and electrostatic accumulation. Containers shall be labeled. Keep container closed when not in use. Wear appropriate protective equipment to prevent inhalation and contact with skin and eyes. When using such products, ensure that a high standard of personal hygiene is maintained.
