Tacusil® S20003 is a general purpose paint and gasket remover. Its special formulation clings to surface's and penetrates to lift off and strip a range of gasket materials in addition to paint, varnish, shellac, decals and adhesives.
Avoid breathing in steam or smoke. Contact with skin, eyes and clothing.
Store in original container. Keep the container closed and store in dry, cool and well ventilated place. Freezing will affect the physical properties of the product without damaging the properties of the material itself. Defrost and mix well before use.
Tacusil® S20004 is a paint remover. It can "peels off paint" and remove industrial finishes quickly and easily. Dose not raise grain or remove stain from wood. It works fast, will remove many coats with one application.
Tacusil® S20009 is an adhesion promoter, which can improve effectively promote the adhesion between organic polymers and PP, PE as well as PA. Using with our company's moisture-curing cement, various dissimilar materials can be bonded.
Avoid breathing in steam or smoke. Contact with skin, eyes and clothing.
Store in original container. Keep the container closed and store in dry, cool and well ventilated place. Freezing will affect the physical properties of the product without damaging the properties of the material itself. Defrost and mix well before use.
Tacusil® S20010 is an adhesion promoter, which can improve effectively promote the adhesion between organic polymers and Nylon, PC, ABS as well as PVC. Using with our company's moisture-curing hot melt cement, various dissimilar materials can be bonded.
Personal protective equipment:
General protective and hygienic measures:
- Keep away from foodstuffs, beverages and feed.
- Immediately remove all soiled and contaminated clothing. Wash hands before breaks and at the end of work.
- Avoid contact with the eyes and skin.
Tacusil® S20019 is a release agent where a non-transferring release is necessary. This semi-permanent, non-migratory release system chemically bonds to the mold surface to form a micro thin film which is stable at temperatures exceeding most molding processes Tacusil® S20019 can be used for the release of epoxies, polyester resins, thermoplastics, adhesives, and rotationally molded plastics.
Tacusil® SIA0015 is a two-part thermally conductivity silicone base potting material. It can completely cure at room temperature to a flexible polymer with very low hardness and stress in the curing process. It contains abrasive aluminum oxide filler which introduces wear considerations for wetted components and designed for the big volume potting and provides very good resistance to chemicals.