Tacusil® EPA0135G is one-part heat cure 100% solids epoxy adhesive. It's high viscosity and long work time under room temperature and designed for bonding applications with high temperature resistance and impact resistance requirement. It also has good weather resistance and adhesion to versatile substrate, such as metals, ceramic and some engineering plastics.
Tacusil® EPA0135M is one-part heat cure 100% solids epoxy adhesive. It's flowable and long work time under room temperature and designed for bonding applications with high temperature resistance and impact resistance requirements. It also has excellent dielectric strength and adhesion to versatile substrates, such as metals, ceramic and some engineering plastics.
Tacusil® EPA0139-2 is a two-part, low viscosity epoxy casting resin. It's a general purpose, 4:1 by weight mix ratio formulated resin with medium exotherm. It's updated version of EPA0139 in longer work time and cures under room temperature within 24hours, it exhibits good bonding strength to lots of substrates and excellent chemical resistance to many kinds of solvents.
Tacusil® EPA0145 is a two-part general purpose potting epoxy. It has good adhesion to versatile substrates and good resistance to chemical solvents and mechanical impact. It also has long time weather resistance and can supply excellent protection to PCBA and electronical components. This adhesive has a white version.
Tacusil® EPA0168 a single component epoxy with long room temperature pot life. It can cure at relatively low temperatures such as 65 °C (20-30 minutes typically) and can cure very quickly at high temperatures such as 90 °C (3-4 minutes typically).
Tacusil® EPA0180 is a two-part very low viscosity general purpose epoxy potting. It's a translucent potting system with adjustable light transmittance and designed for some component potting with special light transmittance. It also has excellent weather resistance, chemical resistance and good adhesin to versatile substrates.
Tacusil® EPA0181LV is one-part heat cure high build 100% solids epoxy adhesive with high thermal conductivity. This adhesive is designed for application where has requirement for high thermal conductivity, high strength, low shrinkage and CTE. It has good adhesion to versatile substrates, such as metal, ceramic and some engineering plastics.
Tacusil® EPA0183 is one-part heat cure 100% solids epoxy adhesive. It's flowable and long work time under room temperature and designed for small area potting application with high temperature resistance and impact resistance requirement. The potted parts can pass 4 times reflow oven and HTHM test (0.6mm thickness 85C + RH85% environment for 1000 hours).
Store in a cool place away from the fire, avoid direct sunlight, rain and sudden temperature difference.
After opening the tank, avoid sunlight, and keep the air circulation at the operation place closed when not in use.
