Avoid breathing in steam or smoke. Contact with skin, eyes and clothing.
Store in original container. Keep the container closed and store in dry, cool and well ventilated place. Freezing will affect the physical properties of the product without damaging the properties of the material itself. Defrost and mix well before use.
Tacusil® U10030 light hardening resin is specially developed for fixing and bonding plastic materials like ABS, HIPS, PS, PC, PVC, acryl and so on. When the thin layer is bonded, the resin is transparent and clear. Under the irradiation of visible light, the resin reacts rapidly and can be integrated with the substrate to produce excellent adhesion strength.
Store in a cool place away from the fire, avoid direct sunlight, rain and sudden temperature difference. After opening the tank, avoid sunshine and keep the air circulation in the operation place. Please close the cover when not in use.
Tacusil® U10032 is a light curing resin developed for fixing and bonding PC and PC plastic substrates. Its good surface dryness is also applicable for plastic surface coating. Under the irradiation of ultraviolet light, the resin reacts rapidly and integrates with the substrate, providing excellent adhesion strength.
Tacusil® U10045 is a photo-curing adhesive designed for the bonding of ABS, HIPS, PS, PC, PVC, Acrylate, and more. When applied as thin films, this resin is highly transparent. This product can cure rapidly under the visible light. Additionally, this resin exhibits good water-resistance.
Tacusil® U10047 is a light hardening resin developed for computer connector PVC/PET/PI and metal connector reinforcement. This product can prevent wires from falling when bending which may cause short circuit. With good hardened surface dryness, this resin can free you from the annoyance of sticky fingers or dust. Rapid hardening can suit electronic packaging mass production best.
Tacusil® U20030 is an optical epoxy resin for optical gaps filling. After curing, the resin has good adhesion, thermal and cold shock resistance and low shrinkage. The product can cure under UV light, but to obtain the best optical properties, except for placing the resin in the UV lamp source irradiation, heat curing process can also be added.
Tacusil® U20040 is a light curing resin for joint filling of optical modules. After curing, the resin has good adhesion, thermal and cold shock resistance and low shrinkage. The product can cure under UV light, but to obtain the best optical properties, except for placing the resin in the UV lamp source irradiation, heat curing process can also be added.
Tacusil® U20050 is photo-curing adhesive designed for the bonding of computer connector PVC/PET/PI and metal connector. The connector will not peel off and short-circuit when the connector is bending. Showing excellent hardness and surface drying, Tacusil® U20050 will not bond hands or dust.
Tacusil® U20051 is a soft light hardening resin developed for fixing and cementing glass and plastic. Tests have found that its effect on cementing plastic materials is also good. It can harden rapidly under the irradiation of ultraviolet light and provide excellent adhesion strength. Quality control can be done online before exposure to light to adjust to the correct positions.